Pipe Repair in Corona, CA
Polybutylene replacement, copper pinhole leak repair, and whole-home repipes for South Corona, Dos Lagos, Grand Boulevard, and North Corona
Big job? Financing available — 0% APR options through Wisetack.
See Financing Options →Corona Pipe Repair Specialists
Pipe Repair & Repipe Services in Corona
Regal Plumbing & Rooter, a family-owned plumbing company based in Ontario, CA at 2141 E Philadelphia St, Suite R, has been repairing and replacing pipes in Corona — the Circle City — for over 20 years. Many 1990s Corona homes were built with polybutylene pipe that has since been recalled, and newer South Corona and Dos Lagos copper systems are starting to develop hard-water pinhole leaks. We hold CA License #1097482 and serve every Corona neighborhood. Call (909) 600-4561.
- ✓Polybutylene pipe replacement (1990s recall material)
- ✓Copper pinhole leak repair in newer Corona builds
- ✓Whole-home PEX-A and copper Type L repipes
- ✓South Corona, Dos Lagos, and North Corona service
- ✓Section repair and full system replacement
- ✓CA License #1097482 — permitted and inspected
What We Cover
Services We Provide
Polybutylene Replacement
1990s Corona homes often have recalled polybutylene plumbing. We replace it with PEX-A before catastrophic failure.
Copper Pinhole Repair
Hard water creates pinhole leaks in newer South Corona and Dos Lagos copper. We pressure test, locate, and repair fast.
Whole-Home Repipe
A 3 to 5 day full repipe for a Corona home in the $5,000-$11,500 range — permitted, inspected, and finished cleanly.
Our Promise
Why Choose Regal?
Honest Pricing
Upfront, transparent quotes before any work begins. No hidden fees, no surprises — even in emergencies.
Fast Response
24/7 availability for emergencies. We arrive quickly and work efficiently to minimize damage.
Quality Workmanship
Every job backed by our commitment to premium craftsmanship and lasting results.
Explore
Other Services We Offer
Emergency Plumbing
Rapid-response emergency plumbing for Ontario, CA and surrounding cities - we’re on call around the clock.
Learn More →Drain Cleaning
Professional clearing of kitchen, bathroom, and main sewer line blockages.
Learn More →Sewer Line Repair
Camera inspection, trenchless repair, and full sewer line replacement.
Learn More →Water Heater Services
Installation and repair of tank, tankless, and heat pump water heaters.
Learn More →Slab Leak Detection
Electronic leak detection beneath concrete slabs with minimal disruption.
Learn More →Hydrojetting
High-pressure water jetting to scour pipe walls and restore full flow.
Learn More →Gas Leak Detection
Licensed gas line detection, repair, and pressure testing for safety.
Learn More →Water Filtration
Whole-home softeners, reverse osmosis, and filtration systems installed.
Learn More →Commercial Plumbing
Full-service commercial plumbing for restaurants, apartments, HOAs, and businesses across Ontario & the Pomona Valley.
Learn More →Service Coverage
Cities We Serve
We provide fast, local plumbing service throughout the Inland Empire.
Quick Answer
Pipe repair in Corona, CA covers polybutylene pipe replacement in 1990s homes, copper pinhole leak repair in newer South Corona and Dos Lagos builds, and whole-home repipes throughout the Circle City. Recalled polybutylene plus hard water drive most failures. Section repair runs $300-$800 and full repipes run $5,000-$11,500. Regal Plumbing & Rooter, CA License #1097482, has provided licensed service across Corona for 20+ years.
Know the Signs
Signs Your Pipes Need Repair in Corona
If your Corona home was built in the 1990s, check exposed plumbing in the garage. Grey or blue plastic pipe with crimp fittings is polybutylene — recalled, prone to catastrophic failure, and best replaced before it leaks. Even if you have not had a problem yet, planned replacement is dramatically cheaper than emergency cleanup.
For South Corona, Dos Lagos, and Grand Boulevard copper systems, watch for greenish patina on joints under sinks, water bills creeping up, or damp spots on slab floors. North Corona homes from earlier eras may also have galvanized supply line corrosion. Call (909) 600-4561.
Our Process
Our Pipe Repair Process in Corona
For Corona jobs we start with a visual identification of the pipe material (polybutylene vs copper vs galvanized) and a static pressure test. For polybutylene homes, we recommend planned replacement — the material is too unstable to keep patching.
You get a written quote with PEX-A and copper Type L pricing options. Permits are pulled with the City of Corona and final inspection is completed before walls are closed. Repipes run 3 to 5 days with water restored every evening. Pair with whole-home filtration to extend new pipe life.
Local Conditions
Why Pipes Fail in Corona, CA
Corona's biggest pipe story is polybutylene — a recalled material installed in many 1990s homes that fails without warning. On top of that, hard water at the city level creates pinhole leaks in copper supply lines, especially in 15-30 year old systems in South Corona and Dos Lagos.
For sudden bursts, see emergency plumbing. For under-slab issues, see slab leak detection.
Coverage
Pipe Repair Service Area Across Corona
From South Corona to North Corona, from Dos Lagos to Grand Boulevard, we cover every Corona neighborhood. Browse our full pipe repair services or visit the Corona service area page.
We also serve neighbors in Chino, Ontario, and Fontana. Call (909) 600-4561.
Common Questions
Frequently Asked Questions
Ask about our current specials when you call.
Need Pipe Repair in Corona? Call Now
Family-owned, licensed, and serving Corona for over 20 years
(909) 600-4561Call Now